PAGsports Jogging Tracks – Jogg21

PAGsports - Jogging Track in Dubai, UAE
PAGsports Jogging Track at the Corniche in Beirut

Total Thickness PAGsports Jogging Track: 20mm

2-Layer Elastic Seamless Jogging Track Flooring of 20mm total thickness. It consists of a shock-pad base-layer of 18mm of SBR Granules mixed with MDI PU Binder. The base layer is covered by a second layer of flexible PU pore-filler followed by UV resistant aliphatic top-coat.

Build-Up

Subbase of fully cured (at least 28 days) asphalt or concrete free of any dirt or spillage, that might prevent bonding of the rubber to the asphalt.

PU Primer PAG PP1000 applied by roller on top of the subbase.

SBR layer consisting of SBR1030 (granules of 1mm – 3mm size) mixed with PU Binder PAG PB3300 (20% in weight). Installed by paving machine at 18mm thickness.

Pore-Filler layer, consisting of 3-component pore-filler PAG PS4000 (red color) applied with metal trowel to create a nonporous layer of 1-2mm thickness.

UV-Protection layer consisting of UV stable aliphatic protective top-coating PAG PP7000 applied in 2 coats by airless spray or roller. Optionally, silica sand can be added to the first coating to avoid a slippery surface during wetness.

PAGsports Jogging Track – Jogg21E

Total Thickness: 25 – 30mm

3-Layer Elastic Seamless Jogging Track Flooring of 20mm total thickness It consists of a shock-pad base-layer of 18mm of SBR Granules mixed with MDI PU Binder. The elastic base layer is covered with a thin layer of EPDM0515 (0.5mm – 1.5mm grain size) and a second layer of flexible PU pore-filler followed by UV resistant aliphatic top-coat.

Build-Up

Subbase of fully cured (at least 28 days) asphalt or concrete free of any dirt or spillage, that might prevent bonding of the rubber to the asphalt.

PU Primer PAG PP1000 applied by roller on top of the subbase.

SBR layer consisting of SBR1030 (granules of 1mm – 3mm size) mixed with PU Binder PAG PB3300 (12% in weight). Installed by paving machine at 13mm thickness.

EPDM layer consisting of EPDM0515 (granules of 0.5 – 1.5mm size) mixed with PU Binder PAG PB3300 (18% in weight). Installed by paving machine at 5mm – 10mm thickness.

Pore-Filler layer, consisting of 2-component pore-filler PAG PS4000 (red color) applied with metal trowel to create a non-porous layer of 1-2mm thickness.

UV-Protection layer consisting of UV stable aliphatic protective top-coating PAG PP7000 applied in 2 coats by airless spray or roller. Optionally, silica sand can be added to the first coating to avoid a slippery surface during wetness.